2002 Chrysler PT Cruiser "remove fender passenger side" Questions

Ad

FENDER WELL..ABOUT AN INCH OR SO IN DIAMETER..THERE IS A TORX BOLT(T55)IN BEHIND PLUG..CHECK AND SEE IF IT'S NOT BROKEN..TRY TIGHTENING OR LOOSENING IT..IT MAY BE BROKEN OFF IN PLATE THAT IS BOLTED TO

Ad

Question about Chrysler PT Cruiser

1 Answer

...will find the bolts to remove on the old fender . They will normally be along the top inside , at the bottom near the door and around the bumper and up the panel that the door hinges are attached ...

Ad

...remove passenger side front fender? 5 or 6 bolts on top one on bottom usually have to open passenger door to see it one bottom front bumper may hide it There are a few ways to remove a passenger side ...

...on 2013 gmc terrain Open the hood. Remove all the bolts on the top of the fender. Remove all the screws in the inner fender holding the plastic on. Remove all the hardware holding it to the ...

...on the passenger side. Look up from the bottom behind the fender. You can access it one of two ways: either remove the passenger front wheel and wheel well cover, or, remove the passenger

fender, then remove the bolts holding the bumper onto the actual body of the car. lastly, as you pull the fender off, be careful of the side marker blinker light remove that as you pull the fender off

Question about Chrysler PT Cruiser

2 Answers

...Remove the passenger side front wheel and fender well splash guard. Disconnect the passenger side outer tie rod end from the spindle. See . Remove the exhaust system Y-pipe. Unplug the connectors and ...

...Front - Removal) . Remove front lower mounting bolts. Loosen rocker panel cover as necessary. Remove rear lower mounting bolts. Remove upper fender mounting bolts. Remove fender from

Question about Chrysler PT Cruiser

1 Answer

so i can get to the battery you don't remove the fender,
remove the right front wheel,in the front side of the inner fender there is a panel you need to remove to gainn access to the battery

Question about Chrysler PT Cruiser

1 Answer

...fender . Remove passenger front wheel for better access. Jumper points for jumping with booster cable should be labeled under hood. Usually (+)Positive at front area of passenger fender, and negative ...

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

1,904 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...