2002 Chrysler PT Cruiser "pull motor" Questions

Pull levelling motor straight from headlamp unit. Significant force will be required to unsnap motor control arm from lens reflector. NOTE: The headlamp levelling motor control arm is snapped into the

...you have replaced it. Other than this there can be one issue only, wire connected to motor which pulls or retract the window pane. Custom Car ...

...so I can get to the crankshaft sensor. Thanks! You may sneak it out with small fingers with out pulling out the starter. If starter removal is required,Just unhook the battery cables,Remove the 2 ...

...work again. If this does not work then pull your door panel and check to see if the regulator motor is getting electricity. If it is then replace the Motor, if not then find the relay and replace

2001 Pt Cruiser Quit I was pulling out from my childs school and ,suddenly my 2001 Pt Cruiser Ltd decided it wanted to quit.I tried to start it up again but it wouldnt. The motor turns over somewhat ...

...pull out and it shut off, now it won,t start back up, put new battery in, new switch, still nothing, The lights work, horn, radio, all is great, it just won't do anything went turning the switch ...

when I bolt the 2.4L to the automatic transmission the fly wheel will not turn I have pulled the motor back out several times. every time I tighten the motor to transmission the fly wheel won't turn. ...

****** quit pulling, just catches some times, fluid smells & looks dirty. ****** wines when first turn motor on. looks like very fine metal grit in fluid. YOUR TRANSMISSION SOUND LIKE IT HAS ...

...motor mount bracket. Have a good crank pulley puller and a source of heat. A crank puller wasn't strong enough to pull my pulley off. Add heat and it came off with ease. Those were my two biggest ...

...bracket? if you are replacing the water pump on a pt cruiser the motor WILL have to come out. you dont have the room to pull the water pump out of the block.. the water pump gets stuck on the ...