2002 Chrysler PT Cruiser "change cam sensor dodge" Questions

Ad

...cam sensor was bad changed it still wouldnt start whats next step On this type of vehicles' "Diamler-Chrysler" for some reason the Crank and Cam sensor go bad at the same time but it will still tell ...

Ad

...change out the cam position sensor on my 2001 Dodge Neon. ... 1997 Dodge Neon no start, crank sensor problems - Duration: 26:53. Dodge Neon Questions - It will turn over but has no spark ... ...

Ad

i change my cam sensor crank sensor in my 2001 dodge durango and it will not run for more than 10 mins change your coil pack. I guess if you change cam & crank sensor it's a 4.7L.Does it restart

...change cam positiom sensor in 2000 dodge how to change cam position sensor in a 2000 dodge intrepid and where is it located The cam position sensor on the 2.7 engine is on the driver side of your ...

cam sensor error changed sensor turns over but won't start. Had a cam sensor error code a few days ago. Changed cam sensor and still same problem. You may have jumped time,since the cam sensor did not

Question about Chrysler PT Cruiser

1 Answer

...next i'm going to change the crank sensor to see if that is it ????????? yes def change crank sensor that controls the coil on wen to spark... cam sensr usually controls injector pulse.... good ...

...cam sensor in distributor.still have code 1391.is it possible that this engine could have cracked flywheel like in the 3.3 engine? po 1391 is crankshaft sensor or cam sensor change crankshaft ...

...crank and then won't .changed crank sensor,cam sensor, fuelpump and computer.any ideas it is cranking ( turning over ) but not starting check the cam shaft position sensor wires . immobilizer ...

Question about Dodge Cars & Trucks

1 Answer

...cam sensor, cam sensor connector, coil pack, plugs wires. now i havent checked the crank wires too good, or traced the cam wires all the way in, anything else i could check before opening up the ...

Question about Chrysler PT Cruiser

1 Answer

Change cam sensor & erase codes.( disconnect battery for a minute or so after.) 340 & 1391 refer to cam sensor problem, and all other 300 codes are cylinder misfires that should disappear when

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

1,904 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...