2000 Chrysler Town & Country "location fuse 3rd brake light" Questions

...not working I have a 2000 Chrysler T&C brake lights(both) not working including the 3rd Center one when brakes are pressed. Fuses are good. Any Ideas? BRAKE LIGHT SWITCH LOCATED ABOVE THE BRAKE ...

fuse for the 3rd brake light it uses the same wiring as the brake lights, its just feed off a wire that runs from the rear brake lights wiring to the 3rd brake light. where is located brake light fuse

location for fuses for this vehicle.. did you check them all?One is located in the engine compartment far as I know it does not have a separate fuse for rear brake lights.The second one

...fuse bo x If none of your brake lights including the 3rd or high mount light are not working.You will need to check fuse no.13(20amp) in the under dash fuse panel,then check for power to the brake ...

...lights are operated off of the same fuse. Check the bulb in the 3rd light, or the connection to it. It can also be a bad brake light switch if you don't have separate isolated amber rear turn

...3rd light either. fuses were good. now what? Sounds like a bad brake light switch which is located under the dash on the brake pedal arm. Becky, make sure you check the fuse box under the rear driver ...

3rd break light fuse location 2011 Camaro Third brake light and the other brake lights are on the same fuse.

...got in and shorted it. Want to check for a second fuse but unsure of location. No fuse for it. It runs off the brake and/or turn signal light fuse. Corrosion from water is usually what kills

...3rd light in the trunk lid. First I'd check the fuse. Then I'd check the bulbs. Then I'd check the brake switch located under the dash and operated by the brake pedal. Use a test light or