2000 Chrysler LHS "crank" Questions

...car turns over good, but it will not start. Any ideas as to where to go from here? Cam sensor? or Crank sensor? I know that the generic definition of DTC P0340 is "No cam signal at PCM" however, a ...

...ever you buy the battery,they will have the size listed,all you need to decide is how many cold cranking amps you want, the more cold cranking amps the more you can crank your engine over before ...

Where is the crank sensor on a 1999 LHS? The crank sensor is located in the transmission bell housing on the lower passenger side where the trans bolts to the engine almost right above the right axle ...

...CHANGING SENSORS,FEUL PUMP,COIL PACKS AND COMPUTER BOXES,JUST WONT START?ANY IDEA? If it is cranking with out turning over I would check the fuel pump and ignition relay, crank and cam

...and all of the sudden my car just dies i still have power, like the lights work and my car will crank but wont fully start. my father says it might fuel pump. but today i had a spark plug tester ...

How do you get the crank shaft pulley off? How do you get the crank shaft pulley off of a chrysler LHS 3.5 liter? By using a harmonic ballancer wheel puller tool. 

Where is tha crank sensor on a 97 lhs? The crank sensor is located under hood, lower driver's side of engine, mounted on the cylinder block. Hope this helped and best wishes.

1996 Chrysler LHS - Diagnostic code reads ''intermittent power to CMP and CKP'' what does that mean? it is losing the signal from the crank or cam sensors, a sign of a crank sensor failing.

I have a 97 chrysler LHS that sparks once when first cranking then stops sparking,i tried cam sensor,crank sensor and coil packs. Probably the ASD relay. Try testing the car with remote star from the ...

new battery and new starter but still will not crank only clicks About 2wks ago the car would not start not even with a boost, at that time the starter was replace the car ran fine. Then this past ...