2000 Chrysler Concorde "pressure" Questions

...when in idle. Oil on dip stick measures fine. install a mechanical guage to test the actual pressure, if its fine the sending unit is faulty, if nor remove the oil pan and check the oil

...procedure to test the fuel pump before changing it again: TESTING Fig. 1: Connect the fuel pressure gauge C4799B or equivalent to the fuel rail service valve - 3.3L shown Fig. 2: Checking

Can anyone tell me what the oil pressure should be for a 2002 chryler concorde. 3.5 litre single overhead cam, 24 valve? Hi!! THE OIL PRESSURE SHOULD BE CHECKED REMOVING THE OIL PRESSURE SENSOR AND ...

...fault code is set, post them here, or google the code to get descriptions. You should have the fuel pressure checked to see if it is at proper pressure. A weak or tired, old pump just may not be ...

which line high pressure A/C line and which is the low pressure on a car? The low pressure line should be the larger of the two lines. If you have 134A and are trying to refill it the connector will ...

2003 dodge neon, error code PO551. power steering 2003 dodge neon, error code PO551. power steering pressure sensor.where is this located? The Power Steering pressure switch is mounted in the pressure

I NEED TO REPLACE THE POWER STEERING PRESSURE SENSOR BUT I NEED A DIAGRAM OF WHERE IT WOULD BE ON A 99 CRHYSLER CONCORDE Hi! The power steering pressure switch is mounted in the pressure line between ...

My oil pressure light comes on when I come to a stop took it to a garage they said pressures fine I had a new sensor put in but it's still doing it I have a 2000 concord with the 2.7L Chrysler has a ...

...from venting into the atmosphere, and instead purges them into the engine to be burned. Regular pressure tests are conducted by the PCM to monitor the sealed system for leaks. The PCM monitors

...is proper fix for fault code p 1782 P1782 - P/ES Circuit Out Of Self Test Range. Means that 2-4 pressure switch sense circuit failure. It basically means that the transmission solenoid pack needs ...