2000 Chrysler Concorde "buss cable" Questions

...all the parts you listed and the battery dies, it is a connection problem. Check  for a master buss fuse between the battery and the alternator. On some cars these may be very hidden,some not so ...

...cable and buss bar terminals, using a small flat-bladed tool to release the clip retainer. Click to Enlarge Remove the bolts from the buss bar jumper bar. Click to Enlarge Remove the buss bar jumper ...

...buss bar bolted on to the positive battery cable with new 6 or 8 gauge wire.removed solder and uncrimped old wire. re crimped and soldered new wire.snaked through corrugated plastic wire protector. ...

...the tach reads, 2000 but my opto scan shows 3000. the cluster brain gets tacho data , via a data buss (CAN) from the PCM brain, so scan the PCM for errors it can be 3 things. 1: bad tacho. 2: bad ...

...cable connection is tight and clean. Check positive connection at starter for loose or corrsion. Negative bolts to front of engine on right side, make sure its tight, no damage, no corrsion. ...

...off, but restarts ok. sometimes it will not restart right away, all gauges go dead and reads no buss on odometer section. First thing I'd check would be battery cables, at both ends for clean, ...

...the PCM is fried... What is it? Google the codes for your vehicle Lost communication with the pcm,buss & other modules Check all your fuses,fusible links & any ties bars in or under the

...wrong Is the battery in car still and battery cables still hooked up?? If so start with the Main buss fuse.. they are usually much bigger then the regular fuses and will be located under the ...

...cable waiting several min and hooking it back up. have your fob handy for the alarm if one is installed and check again. an easy way to check for can buss signal is with a inexpensive scan tool obd2. ...