1992 Chrysler Lebaron "replace turn signal flasher" Questions

...replace the entire circuit board that the turn signal unit is plugged into. FYI. The 90 and 91 Le Barons (along with some later years) have what are called "combination flashers." This flasher unit ...

...then just quit and won't work for awhile and then all of a sudden they start working again. i have replaced the flasher but that hasn't helped any. it is the turn signal switch in the steering ...

...chrysler converible turning signal problems turning signal doesnt work Do the bulbs light but not flash? If so then replace the flasher relay, it is a small round canister near the steering

...bulbs, If you've verified that all bulbs are in good working order and the turn signals still are not flashing, you have a bad flasher most likely. They are relatively cheap and easy to

...turn signal switch,replace it. This may sound silly but try changing the bulbs even if they're good. The pressure from the springs on the contacts in the sockets and the vibrations from the road ...

turn signal switch works fine, but, especially in the summer heat, it seems to not work. When it is really hot, I can hit the top of the dash really hard a couple times, or even jiggle the switch when

...turn signal, yet the right side works just fine. I'm guessing it may be the relay, but where is the relay? You need to replace one of the left side bulbs,front or rear.Without both bulbs working the ...

turn signal..flasher replaced. is It the multifunction lever then?? There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not

...Testing and replacing flasher unit HOW TO REPLACE THE TURN SIGNAL FLASHER ON 02 CHRYSLER SEBRING LXI Saturn series Turn Signal Flasher ...

...turn signal turns on flashers. Even with the key off and out of the ignition. Replaced Multi switch and combination flasher. After flasher was replaced it worked fine for about a week. Then the ...