...engine code is very broad spectrum of issues try taking some throttle plate cleaner and while the car is cold spray it around behind the throttle body. on a lot of Cadillac's their is a rubber boot ...
...sts v8 check engine light came on no real difference in car has engine codes p1101 and p0174 did notice it baugs out when u throttle heavily in park O2 sensor has detected a lean condition vacuum ...
...engine control module (ECM) controls the air/fuel metering system in order to provide the best possible combination of driveability, fuel economy, and emission control. Fuel delivery is controlled ...
...engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment. Also if this sensors ...
...code is caused by an ECM (Engine Control Module) receiving a signal indicating the O2 sensor for bank 2 sensor 1 has failed to increase the voltage ... Code P0171 - System Too Lean: Symptoms, causes, ...
...P0174 .... I have a 1995 ford mustang gt 5.0 and it keeps having a Fault code 176 pop up. ....Ford Explorer P0174 code intake air leak check engine light by froggy - Duration: 16:11. by froggy
...Code P0174 indicates that there is a lean condition detected by the Engine Control Module (ECM). A lean condition will be created if there is too much air, and not enough fuel, in the air fuel ratio ...
Question about Ford Cars & Trucks
...engine code indicates that the air-fuel ratio in your vehicle is too lean. Before the gas in your car can combust and power your vehicle, it must first combine with oxygen. P0174 Code: Causes, ...
Question about Cars & Trucks
code, check engine light on temp loss of power checked code tody seems to run ok now loss of power only 3 miles an hour put in natural reved engind waited for rmps to come down power resumed had engie
...Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position. When is the code detected? The P0761 code is detected when the ECM has detected a mechanical fault ...
369 questions posted
Usually answered in minutes!
302 Questions
29 Questions
15 Questions
12 Questions
2 Questions
