I have a creaking sound coming from the front end when turning tightly. Sounds like CV joints but these have been checked OK. 8P S3 with 40k on it. Could be front strut, top bearings or springs making
the mechanic cant seem to locate the problem It's creakingat the front suspension if it ha mcpherson struts. The springs at their top. Spray water up into the spring tower and if it goes away viola!!!
after hitting curb hit a curb on a right hand bend and my front wheel was out of line the top of the wheel seams to stick out past the wing iv changed the wishbone with new 1 withe all new bushes and ...
...front struts on a 99 Honda Accord go google and type in-- front struts on honda accord 1999 model --and there is a video on youtube .com that shows you how to do ti 1999 Honda Accord Front Strut ...
How do I compress the front strut enough to get the nut on when replacing a 1997 Chrysler cirrus front strut? One needs a special tool called a 'spring compressor' to compress the front strut spring ...
...struts on the front or back of this car? The struts model (MacPherson Strut),are both in front and back of this car. 2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Driver Side, ...
...Front struts installing are bit longer? http://schematicsdiagram.blogspot.com/2011/12/front-struts-installing-are-bit-longer.html-----------This will help.Thanks.How to remove Strut Assembly,the Coil ...
Front struts replacement I need to know how to change the front struts on a 2004 nissan altima 4 cylinder. Jack up and secure front end of your vehicle,Take off two front wheels. Loosen to bolt on the
front struts on a 2007 tundra Please don't forget to rate! Before servicing the vehicle, refer to the Precautions section. Remove or disconnect the following:Front wheel Strut-to-lower control arm nut
478 questions posted
Usually answered in minutes!
131 Questions
94 Questions
40 Questions
20 Questions
17 Questions