2005 Acura TSX "fuse driver side door 05" Questions

...fuse #7 on the driver side sub panel, located just above the engine hood release. I then disconnected the neg. terminal on the battery. I manually opened the pass. side slider and closed it. I ...

driver with a rag to avoid scratches. Below is a link for an 07 trailblazer. The 06 and the 07 share the same wiring system. http://www.wiringdiagrams21.com/2009/05/22/2007-chevy-trailblazer-l6-engine

...fuse panel on the drivers side of the dashboard.You need to open the door to see it.(the fuse panel ) The fuse should be a 7.5 amp fuse. Good luck ! On my 05 Chevy Malibu all it does is blow the air ...

driver side window switchs dont work at all. i have replaced the switch, fuse, and relay. It still doesnt work i would say it would be the motor but the pass botton on the driver side door doesnt work

...fuse several times.it only works for a short time after that I don't know if this will help but the electric door lock (driver-side, rear, sliding door) of our '05 T&C stopped working and the ...

...side, or there should be a little trap door when you open your drivers door, probably next to one of the vents. Those covers are usually labeled with what fuse goes to what. Good luck. Year Make and ...

...fuse for my power seats. (Driver side) they aren't heated seats. The other day, my seat caught on fire at the track and I'm wanting to disconnect the power to them, but I have no idea where the fuse/ ...

driver side window isnt working but the rest i took the positive battery cable off now driver side window isnt working but the rest do.and the door locks dont work either i checked all mini fuses and ...

...side steering wheel, flip the fuse box cover lid over and replace the power window and power door lock fuses. The back of the cover lid will have a diagram showing where each fuse is located, replace ...

...driver side door will not lock. What is causing this problem? dont waste your time checking fuses, if it was a fuse ALL doors would not work. Take the door panel off and check the voltage to the lock ...