2000 Acura TL "new ignition wont lock place" Questions

...new ignition won't lock in place replaced old ignition with new one and the new ignition won't lock in place If the ignition wont lock in place,just redo it but this time you need to ...

...new batteries) The key wont' remotely lock/unlock or open the trunk any more. I thought it could be the battery so I changed the battery but still don't work? any ideas? place key in ignition turn ...

...or broken ignition switch (under the dash on top of the steering column). If you disconnect the switch from the control rod that comes from the cylinder and the cylinder turns you need a new

...new ignition lock, check out Rush Locks and Keys. They have the 1998 Ford Contour lock you are looking for and its the cheapest place to buy anywhere. Then locksmith can install it for you. YOU DONT ...

...ignition lock cylinder but as soon as i lock the new one into place and turn the key into the lock position and try to pull the key out it wont come out help sounds like the cable is not latched in ...

new switch wont go in key stuck in ignition took old one out and tried to put new one in and the one won't lock in place Well bad luck, This tool electric pick gun may help you.

...ignition cylinder is jambed, if you remove the covers and put the key in, you might be able to turn it with pliers, just turn it to the accessories position, then there is a small metal clip that ...

...ignition lock cylinder Hi the lock cylinder locked in our 1994 ford ranger and we were trying to remove the lock cylinder but we could not find the hole under it to remove it. so i was wondering if ...

...still running, so we had to remove a fuse. The key is still stuck in the ignition. Any help/advice? get a new ignition lock cylinder. they usually have simple instructions with them on how to ...

ignition switch itself has two mounting bolts that connect it to the steering collum loosen these two bolts and slide the switch forward towards the steering wheel as far as it will go.  hold the