2006 Mercury Milan "back brakes rubbing new pads" Questions

...rubbing noises either from rotor replacement. Possible minute for a short period until the brake pads wear in to fit new rotors, but that shouldn't be noticeable. I would take the vehicle right back ...

...new rotors and pads. wearing in,normal Until they wear mate together this is normal. can be breaking in but look under vehicle sometimes the backing plate bends up into rotor also if e-brake is not ...

...back up (you may need to empty some out). The problem with the noisy pads may be a little more tricky, is it a squeeling noise you hear when brake? is it a grinding noise (like metal on metal) when ...

...rubbing against the brake rotors most likely its the front brakes being they are 75% of your braking power.Cost for new ones anywhere from $35-$95.00 each depending on model of car.Labor not included ...

...back of the pads before fitting,didnt you?(anti squeel grease). the rubbing noise will go as the pads bed down. goeffreyh is right, also it's normal to get a sqeel for a short time while your brake ...

back brakes, you should slightly hear the hub lightly rubbing on pads. That will go soon Front ones are self adjustin, but how were the glide pins, did you lub them with a graphite base grease. Now if

...back together but now I hear rubbing on passenger tire when I drive it . What could it be ? TAKE IT APART AND PUT IT BACK TOGETHER AND SEE IF IT WORKS.COULD BE OUT OF ALIGN. did you fit new pads at ...

...brakes on 2006 montana sv6 what to do with the shims that were included with the pads? Dear Stray Shims.........these shims that came along with the new brake pads are designed to be installed on the ...

...rubbing on the inside of the rotor that can cause it to get extremely hot. Is there a lot of resistence when you freely turn the back wheels? The new pads might be slightly larger than they should be ...

...brakes the back plates are bent and cause the sound you're reporting. The ABS rotors, if correct should not come into contact with the sensors. Are the brakes efficient when applied? If ...