turn light off how do i turn off maint req'd light on my 2003 acura 3.2tl Hi,welcome to fix ya. on the right hand side of the speedo cluster there aer 2buttons labled set and reset. push and hold them
...turn off at the switch but will turn off when the ignition key is turn off Bad wiper switch or bad parking mecanism in the wiper motor asm. Switch is most likely. You can pull the wiper fuse so you ...
...turn the car off (and usually if i have been running the A/C) This has not happened before but started about 3 weeks ago. Fan stays on about 10 mins after turning engine off--is this reason for ...
...engine off.push the reset button on clock control panel for 3 seconds,then turn off ignition switch.then turn back on the ignition switch the maintenance light should be off is so.it has
...off . next turn the key back to on position the light should only come on once. now you can start the car There could be a hundred causes for a check engine light. First step is to hook up a computer ...
...turn off the engine. Once I reach my destination, I turn off the engine and no matter how long it is off (five minutes or three hours), 30 seconds after turning on the engine, it starts to fail and ...
...turn off the Check Engine light on Acura TL 3.2 1999 You can turn off the Check Engine light by either disconnecting the battery or by using a code reader to clear the codes. However, if the problem ...
...engine, wait approximately 15 seconds until maintenance required light stops flashing. Turn key back off. Turn on again without starting if reset is successful maintenance light will only appear
...off.Now turn the ignition key on again and press either button on the FOB. Turn the ignition off again. Do this 3 times. This initiates programming for the power door locks. Press the lock button of ...
my signal won't turn off signal won't turn off after turning Turn signal switch has to be replaced.
312 questions posted
Usually answered in minutes!
424 Questions
415 Questions
325 Questions
357 Questions
278 Questions