...engine light still on? Replaced O2 sensors It may need to be reset Why did you replace the 02 sensors? These monitor the amount of air/fuel in the exhaust. If the engine is running too rich/lean the ...
...engine which will be trashed if the timing belt breaks? I have 90K miles on the car and don't know whether I should have the belt replaced early (book says replace at 105k). Yes it is, replace the ...
...engine seizes time taken ~3 seconds. probably a good time replace it, its due to fail now even if the 105K is a conservative fail safe number i would like to know how to hook up a timing light on a ...
...deeply black with metallic substance like silvery or aluminumish.Is it turbo and used all the oil. if there is no oil put some in it if there is oil then youll need to replace the engine or rebuild ...
...Replace it with a used engine (cross your fingers and pray you get a good one - hopefully, one that has been properly maintained and isn't nearly as bad as the one you are replacing). > Remove ...
...idle to be erratic. The vacuum lines or hoses should be traced down for any cracks or dry rot and replaced. The heat from the engine and the emissions causes the hoses to break down and a lot of ...
...replace front and rear o2 sensors to turn off check engine light, I took it to the dealership and was told it was cost $800 to fix the problem. I need the check engine light off to pass emissions. ...
ECU engine management warning light ECU Engine management system has been replaced but the engine management warning light still comes on. The car still performs well but I don't know if anything else
replacing the timing belt Does it involve removing the engine? No the engine does not need to be removed, but the crank pulley can be a bear to get off.
568 questions posted
Usually answered in minutes!
495 Questions
227 Questions
191 Questions
166 Questions
75 Questions