1999 Plymouth Neon "spider arm" Questions

Ad

Question about Plymouth Neon

1 Answer

...Have you taken the distibutor cap off ? if not, take it off and check for spider like tracks from the centre electrode to the other terminals, also check rotor arm for signs of melting, cracks

Ad

...spider. it left a very swollen lump on my arm that was painful and itchy for 2 weeks. now its healing up. If you do not feel sick, you should be ok. The swelling and sore that develops should hit its ...

Ad

Question about Plymouth Neon

1 Answer

...s seat and the source seems to be the grill/air intake just below the windshield. The car is a 1986 Spider Veloce. Many thanks, Wolf. You can pull that panel off. Remove your wiper arms and then ...

...Spider which usually had a single points distributor (points specs on page 21):- http://homepage.mac.com/tmckaskle/fiat/images/specs/index.html#page1 When doing this job also check and replace both ...

...it was ok.That happened 2 times coming and going to work. Now as soon as it got hot it spits and spiders and dies and won't start till its cooled down. Most engines don't fair well under ...

...arm center link and tie rod ends are new. Not talking about rotation talking side to side. indicates that the spider gears in the diff have a slight wear in the thrust washers and the tooth clearance ...

...arm and hub nut to do this. Next, remove axle lock actuator on passenger side of front axle. Place a drain pan underneath front diff cover and remove cover and drain axle. In the center of ...

Question about Plymouth Neon

1 Answer

...spider is a 4-point tool you can make up from a piece of aluminum." Do the rubber bushings come with replacement ball joint? Where exactly do the bushings fit, in the flange the bolts to the diff? I ...

...right hand turn or curve to right. Feels like my old 66 G T O when i lost a tooth off a spider gear. One mechanic suspects faulty abs(???) thump noise moving thru driveways is the lower control

...spider and push in. Fit the circlips as before, if a clip will not locate in its groove you will most likely have a needle roller out of place, no worry you have to take the caps off as with the old ...

Not finding what you are looking for?
1999 Plymouth Neon Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...