...blend door is not working? If yes, it's the control head or the temp blend door motor on th plenum case under the dash. Buy used on ebay. DO you have manaul or electroic controls? If electronic A/C ...
blend air door for the hot and cold may be stuck in the heat position. The tempature setting moves a blend air door between the heater core and the A/C evaporator. Check freon charge. And check system
Question about Mercury Grand Marquis
blend door binding/stuck. Temperature blend door actuator (19E616). Incorrect heater control valve (18495) operation. Go To Pinpoint Test I . Are the heater hose's going through the fire wall hot ? I2
...blend door motor/actuator. Remove the four screws holding the blend door actuator to the plenum. Remove the temperature blend door actuator. Fig. Blend door actuator electrical connector Fig. Blend ...
blend door actuator)are showing up Code 24 and 25 (blend door actuator) are showing up on the electronic A/C display. I reset this code over and over by hitting the floor and off buttons simutaneously
...blend door. You may have to remove the control panel to access the blend door lever and cable. Check to see if the cable has come loose from the bracket that holds it. Some instructions are provided ...
Question about Cars & Trucks
...blend door on the pontiac montana sv6 2005 The heat blend door on my 2005 Pontiac Montana SV6 is not functioning. When I removed the actuator I found that the plastic joint on the door is broken and ...
Question about Chrysler Cars & Trucks
...blend door actuators give errors but do turn on selftest modus on ATC. The error shown on display are 4 items, 23, 24, 32 and 33: 23: Blend door actuator feedback failure (bad servo) 23: Blend door ...
Question about Cars & Trucks
...blend door hoses flushed system Are the heater hose from the engine compartment going to the fire wall hot to the touch ? Is the HVAC - heating , ventilation an A/C system manual or automatic ? ...
...blend door seems to be stuck. When you change settings from defrost to floor air or, vent, the blend door opens and closes directing the air to the place you want it to go to. I have had some success ...
202 questions posted
Usually answered in minutes!
661 Questions
611 Questions
534 Questions
488 Questions
496 Questions