2004 Mazda 3 "3 starter solenoid" Questions

Ad

Question about Mazda MAZDA3

1 Answer

...starter solenoid is good. Rub a jumper cable from the positive battery terminal to the large pole on the solenoid - the solenoid is the small cylinder mounted to the starter. Now take a flat blade ...

Ad

Question about Mazda MAZDA3

1 Answer

starter solenoid (small wire on the starter) If you are, you need to strip the starter off it and find a replacement. It is probably the starter solenoid - (which is non-repairable) that has stuck. As

Ad

Question about Mazda MAZDA3

1 Answer

...3 and I think that the starter is buisted how can I fix this without going to a shop? easy answer, you can't.. You may be able to get a second hand unit and then remove your existing starter and fit ...

Question about Mazda MAZDA3

2 Answers

...starter on 2006 Mazda 3 My car wont start. I replaced the Battery and dont think its the alternator because all the lights on the dash turn on. I turn the key and they engine will not turn over. Some ...

Question about Mazda MAZDA3

2 Answers

...3 had her factory battery replaced. I go to start my car this morning and nothing, not a light, no clicking, nothing. When I took my key out of the ignition a heard a clicking sound coming from ...

...be starter related. Loose connection at starter. Bad solenoid. Brushes in starter. Rap the starter with a hammer and see if the engine will turn over after that. If it does, you've found your

...is bad... rap on the solenoid on top of the starter, with a piece of wood, while someone tries to start it, and usually i"ll start one time for you, don't shut it off or you'll be stranded

...3 which developed the same problem after a few months and was cured by the same fix. My daughter has a 2005 Mazda 6i 2.3L and it idled rough/stall/ shift hard fom 1st to 2nd. After replacing many ...

...3 starter mounting bolts. Remove starter from transmission bellhousing. To install: Position starter motor to transmission housing. Connect battery cable solenoid terminal wire harness connector to ...

3. Starter/Solenoid Issues - Jeep Cherokee Forum www.cherokeeforum.com > Technical Discussion > OEM Cherokee Tech Nov 24, 2009 - So I put a hurting, and a few new dents, on my 95' Cherokee Country, ..

Not finding what you are looking for?
2004 Mazda 3 Logo

636 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2006 Mazda 3
2006 Mazda 3

375 Questions

2005 Mazda 3
2005 Mazda 3

370 Questions

2007 Mazda 3
2007 Mazda 3

157 Questions

2009 Mazda MAZDA3
2009 Mazda MAZDA3

30 Questions

2010 Mazda MAZDA3
2010 Mazda MAZDA3

18 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...