2006 Jeep Wrangler "breaks" Questions

break light stays on the break light stays on even when driving and the emergency break is off. I've noticed there seems to be more travel in the break pedal, but their is plenty of break fluid in

...Once you get it out replace the bleeder screw and try not to overtighten it.If the bleeder screw breaks you can replace the slave cylinder or try to extract the rest of the bleeder

My back breaks wear out twice as fast as the front. Why? The back break pads were shot and the front still had 75% on them. This was after 35K miles. Is there a way to ballance the system? Could be ...

THE STARTER DRIVE BREAKS AFTER TEN OR FIFTEEN STARTS. THE FLYWHEEL TEETH LOOK GOOD AND THE SATER IS QUIET UNTIL THE DRIVE BREAKS. i had that same problem on an old chevelle,till i went and bought a ...

rear break assembly driver side for 95 wrangler there are lots of brake parts. dont break the brakes. ok. why not look at the dealers parts pages.?????/ here it is ...

...If there is a connection remove the big wire from the solenoid that goes to the starter. If this breaks the connection the starter is bad, if the connection is still there you need to pull fuses ...

replaced brake line and bled brake light stays on 02 wrangler if im right there is a switch on ur break pedal  (not knowing whats on ur jeep )but if right there is a sitch  just a little bit

I accidentally closed the electrical cord for my trailer hitch in the door and it caused my break lights and turn signals to go out. We think it grounded and blew a fuse, so we replaced the only fuse ...

...passenger side in front of the base plate, there is a small nipple looks like the one for bleeding breaks, it pokes out of the front bell of the transmission. Bleed it like breaks, have someone push ...

My 2oo7 jeep wrangler keeps needing oil, but shows no sign of leaking and no sign of burnning it. how fast is it dissapearing? if it is dissapearing fast check your radiator to see if it is going into