2006 Jeep Grand Cherokee "idle speed control valve stuck" Questions

...idle speed is 100% controlled by PCM at all times. hot. so its out of control that means the PCM closes the ISC valve. and RPM will not drop. (its stuck open) or vacuum air leaks jeeps use speed ...

...idle speed. They can get gummed and fail to have a fast idle when cold, or get stuck the other way, and have a too fast idle all the or regularly take its time slowing down after you take your foot ...

...idle speed controls" good? yes. then select drive. if RPM drops ISC is malfing. now back to park. (all this is in the FSM to read) now 800 hot. you turn on all heavy electrical loads the rpm does not ...

...idle speed controller) many jeep engine have no EGR, its done with fancy cam timing. i cant speak for all 6 engines at once, so do post engine, size. or its all just guessing.... more guesses. too ...

...idle speed controls dead. ISC the isc controls speed, of idle,. mine stuck like zillion times, in 400k miles. endless.sticking mine was a tiny gutless stepper motor drive ISC valve. the cone valve is ...

...idle speed control valve) gross misfiring for huge reasons. flooding, fuel pressure way to high or injectors leaking. a bad engine. if power is low. lots of tests, compression low? CAT melted, if ...

...Idle Speed (AIS) motor driver circuit shorted or target idle not reached 26 Peak injector circuit voltage has not been reached (need to check computer signals, voltage reg, injectors) 27 Injector ...

...Idle speed. bad battery or bad starter . hot engine, cold or both? hot is 180F+ ! ticks = idle speed, (very old name for idle, but im very old) low idle speed has many causes. (over 50 in fact) but ...

peugeot 106 when i turn it on it goes into very high revs but nothing seems to be stuck remove and clean idle speed control valve if that doesnt cure it replace the idle speed control valve

...idle speed: Check the following: - Spark plug gaps. (0.9-1.0 mm). - Fuel pump pressure. (38-44 psi). - Element air cleaner for clogged. - Valve clearance. - Cylinder compression. - Clean the throttle ...