2005 Jeep Liberty "crank 2004" Questions

2004 3.7 . Is showing these code`s... po300 , p0522 , po335...and I find she`s hard to start....why... there appears to be a problem with your crank position sensor and your oil pressure switch. http:

...2004 Jeep Liberty 3.7 liter 4 cylinder.Did oil change,jeep started severe tapping,clicking from motor,jerking and died out. Trys to crank ,but can't.Is my motor blown up,fuel pump,torche converter ...

what direction do you turn the bolt on the crank pulley to remove it? what direction do I turn the bolt on the crank pulley to remove it? counter clockwise

2004 jeep liberty 3.7 eng will not crank over jump start it will start battery only year old Sounds like your altenator is bad. Most part stores will test for free, in or out of vehicle. Battery, Alt,

...thermostat located on a 2004 jeep liberty? On the 3.7 engine, the thermostat is on the front passenger side where the lower radiator hose connects to the engine.........right next to the crank

2004 jeep liberty 3.7 auto no crank no back up lights you may have a problem with your neutral switch.if the switch is bad your vehicle will not start and also you will not have reverse lights.

I have a 2004 jeep liberty and while driving down the interstate it just shut off and wont even wont turn over just clicks -In this case mostly bad crank sensor. Good luck mai

2004 jeep liberty white smoke 04 liberty cranks and runs but blows white smoke after warms up no water in oil is the head cracked or just head gasket? a lot of white smoke? like kill mosquitoes 6 ...

...check all the plug ins on ign system I assume it always starts right back up ok? sounds like either crank or cam sensor,if I had to guess it would be crank first but next time it dies try restarting ...

my jeep wonts to start but it dont they all want to. that is for sure. does it crank robustly? fast, if does, check spark and scan it for 5seconds cranking the scan tool will tell you in most cases ...