2004 Jeep Wrangler "fan speed resistor" Questions

Ad

Question about Jeep Wrangler

1 Answer

fan works is high speed only, not 1,2, and 3 speeds only #4. Wiring diagram suggest a fan relay/ circuit board. Do not know ifthat is it or where it may be located. Usually, when the fan works only on

Ad

...models. The fan bypasses the resister on high speed. Therefore the fan should run on HI regardless of resister condition. Suspect the fan control switch or wires connected to it , IF the motor is

Ad

Question about Jeep Wrangler

2 Answers

...fan speed resisitors are broken. This means you will have to replace the fan resistor block. The only other possibility would be the fan switch on the dash you use to set the speed. It is most likely ...

Question about Jeep Wrangler

2 Answers

...fan has 4 on settings (speeds) and then the off position. I initially lost the third speed, then the second, and now all of the speeds don't work. How do I fix this? blower motor resister has burnt ...

...replaced everything except wiring with Mopar parts and fan still not working except on high. The winding in the motor may have a short. drawing too much current when trying to run on a lower

...fan speed stopped working. If I played with the switch, I could get it to come on, but that only worked for awhile. Oh well, positions 1, 2, and 4 worked...so I dealt with either too much air blowing ...

...fan speed, the resistor could be faulty. You would need to know if the radiator is full of coolant and if both heater hoses are getting hot. There may be a temp control valve in one heater hose that ...

Question about Jeep Wrangler

1 Answer

fan speed doesn't change between speeds 1,2 and 3 and speed 4 blows hard. I changed out the resistor last night and had no change. It's still doing the same thing as before. Also... Why does my heater

...fan seems to not work in 3rd speed and kinda quit the other day on high speed... check the blower motor resister,that is where the fan speeds come from I had the same problem for years and a ...

FAN DOESNT WORK. The blower resistor has failed. the resistor is located under the dashboard on under the glove box. below the blower to the lower left side you will see the resistor which is approx 3

Not finding what you are looking for?
2004 Jeep Wrangler Logo

383 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...