2003 Jeep Liberty "switch" Questions

map lights come on on their own dome light comes on at any time and turns off when I hit the signal switch replace the muti-function switch (turn signal switch/interior lamp switch/dimmer switch/etc..

2007 brake lights switch not working Not working Normally, the switch is right over your break pedal. it is a small piece with 2 wires. Disconnect the wire form the switch and try to bridge the ...

2002 jeep liberty, high beem not working High beem will not stay on, you can hold the switch up and they work, let go of it and they go out. Just replaced headlight switch and still does the same ...

trammisson presure switch Hello, do you mean transmission pressure switch for automatic transmission? If it is an automatic ****** then there are pressure switches but there aren't called pressure

idont have a break switch on my 2004 liberty jeep or do I if so where is it at A brake switch? To engage the parking brake? It is behind the brake pedal , under the steering colum . all cars have ...

...by doing the following: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch and turn the ...

how too replace pressure switches how too replace pres how too replace the pressure switches. Do I need too recover the freon? My name is Hector sure switches, do I need too recover the freon? Is the ...

...side electric window doesn't raise when toggle is pressed on main panel if passenger window switch work passenger side window and driver side master switch dont. master switch either ...

how do i check the window switch jeep liberty? drivers window wont go up or down Get yourself a test light and remove the switch from the door panel, you should have 12v going to one side of the ...

...don't see a fuse for the mirrors in the fuse block. Is there a separate fuse? Is it more likely the switch? there is no fuse for this I would lean toward the switch. If you want to be positive it is ...