2002 Jeep Wrangler "remove loose stuck door handle" Questions

...loose try tightening it first, if this does't work remove the inside door handle held on with a t15 or t 20 scew and see if the rod has come off at the handle try pulling on the rods to unlock the ...

...loose along the edges, it is clipped to the door with plastic clips. Remove the dust cover - a plastic cover stuck on with reusable glue. Check the winder mechanism, it has probably come loose on one ...

...loose or or the handle itself has broken. You will need to remove the door card on the inside of the door to gain access to the mount bolts and linkages. A common weak point on some doors is the ...

...remove it thank There are two clips in in the handle lever. One clip is above and one below. Slide a flatheaded screwdriver between the handle and the casing to pop the casing loose. You have to do ...

loose and the other larger one did not move after pulling on it also. In order to get into the rear doors, I was thinking of taking the door off at the hinges, swing it around to get access behind the

...remove the door panel The panel pops off. There are cheap tools to help with this at your local AutoZone. You may be able to just pull them off, you will need new clips which are just a couple of ...

...loose except for the door handle? ho power windows stopped working and looking to remove door panel to attempt to repair the power windows. Please help in the cold with windows stuck down! Thought ...

...loose and doesn't feel attached. I tried opening it from the outside however the door handle looks like it was pushed out (it doesn't look fully pushed in) it sticks out a bit, and ...

...Remove the two screws from the armrest. Insert a screwdriver between the trim retainers and the door panel to pry it loose. Eight hidden fasteners. 1 top left side of door. 1 right side about same ...

...loose. With your hands, remove the panel by its contour. There are roughly 10 or so plastic plugD) Tricky Part; Removal of door Handle Free the door handle from the panel, by carefully pushing it ...