2002 Jeep Wrangler "oil pressure goes down accelerating" Questions

...oil pressure per 1,000 rpm ( ex. 20 psi at 2,000 rpm, 25 psi at 2,500 rpm, and so on ) . If the gauge is moving back and forth erratically at idle , i would say the gauge is bad. If it drops to 0 ...

...oil pressure is good when I start driving, but after awhile the oil pressure goes down. when I accelerate it goes up, but when at a stop light it goes back down oil pressure sending unit or engine ...

Oil Pressure Indicator Light comes on when slowing down. The oil pressure light comes on in my 2001 Pontiac Grand AM whenever I slow down or brake then goes back out when I accelerate. What could ...

...me plz The oil pressure should go down after the engine heats up because of its viscosity. When you accelerate the pressure should go up and at idlen the pressure goes down. 20-40 psi range is

after getting oil changed about 2 weeks ago change oil light came on and oil pressure goes up when accelerating and down when stopping? have oil pressure test done. it is probably unit sender defect

oil pressure but wen i accelerate it goes to middle pressure but then down to low wen i stop wat can be the problem? Oil pump or other issues Cam bearings,etc Bad sending unit I would put a mechanical

...oil pressure gauge goes from 0 to all the way up and the needle moves back and forth while driving it checked oil its good now its clicking underneath the car and it felt like the transmission was ...

...and when i slow down it comes back on, i checked the oil and its full. the car has 130,00 miles on it. Low oil pressure, you need a analoque guage to check it. Could be the oil pressure releave

oil pressure while idling im not getting any oil pressure when im sitting still/idling but when i accelerate it jumps right up to the middle, is my oil pump going out? Not really, when the oil is cold

...oil pressure per 1,000 rpm ( ex. 20 psi at 2,000 rpm, 25 psi at 2,500 rpm, and so on ) . If the gauge is moving back and forth erratically at idle , i would say the gauge is bad. If it drops to 0 ...