2002 Jeep Wrangler "chrysler 3 starter replace 2004" Questions

3. Manually hook up an oil pressure gague and check the oil pressure. Make sure the engine is at operating temperature when checking as it can have a significant impact on the reading. (I bought a oil

chrysler 2004 starter doesn,t turn ,battery has 12.7 volts lights and horn works good but starter doesn't even click My 2004 Sebring did just that. it was a fusible link. a tiny square box in there ...

...you should find 2 or 3 bolts holding the starter. The most difficault is getting to the bolts and even worse getting the starter out to replace with new. If you have the money pay someone to do

...and turn engine over. I tried locking and unlocking with buttons on the key but that did not work. It acts like security system locked it out. Any ideas? Chrysler 3 5 FIRING CYLINDER ORDER here you ...

3 times and most of the time it sounds like the bendix isn't hitting the flywheel ring gear replaced with NAPA rebuilt starter and it will start the truck once or twice then nothing. had ring gear

...chrysler sebring battery issues I took the car to auto zone to have the battery tested and they tested the alternator to. Battery came back bad and the guy told me that the alternator was kinda ...

3 consequetive days and even with a new battery installed, it still died on me. I took it to the Chrysler dealership and they told me I needed to replace the Starter Relay and I picked the car back up

Chrysler Pacifica won't start. Just hear clicking sounds. Do have dashboard lights & electrical power. There are some possibilities which you will have to check in this case:-- 1) First of all ...