2002 Jeep Liberty "timming belt broke piston damage" Questions

timming belt broke timing marks You will need to have it replaced and have heads inspected. If the valves his the pistons then there is likely valve damage and some will need to be replaced.

...timming belt broke will driving my 1997 dodge stratus es 2.5 did I damage my motor Possibly. That engine is an interference engine meaning the pistons can contact the valves and cause damage if the ...

timming belt broke when motor was running , fitted new belt an done everything to the book but still wont start could l have a valve on the wong side please help stressed There is the possibility that

...and how do i tell if the pistons are in the right place you need to get a diagrm . try googel . timming marks for your car . if the belt broke while driving more then likley there is engine ...

timming belt broke on 92 accord,set cranke to tdc timming belt broke on 92 accord broke,set cranke to tdc ! went to set cam ,it would only turn 1/2 a turn! Do i need to lower pistons to set cam ? or r

...timming belt broke on a 1998 rav-4 ,2.0 L. did it bend the valves? She was driving on the highway and it does not seam to have any compression. 95% of the time, yes you have damaged the valve and the ...

...timming belt broke, you might bend valves This is a GREAT list to have. The engine in the 93-95, 3 liter v6, is an interference engine and that being said, if the belt were to break, MAJOR internal ...

...timming belt breaks in any engine, it will stop right then. re-time engine and install new belt and away you go, it is a bigger process then that, i just simplified it. the person who told you about ...

...timming marks of the cam-belt on my 1,4 Getz ? The cam-belt failed at low revs, the car shut down and now I have replaced the belt with a new one. I have aligned the top mark and the bottom spot on ...

...timming belt tensioners broke. I have replaced both of the tensioners and I am confidant that I have set the correct timming. The car won't start and when I did a compression check the 1st and 4 th ...