2002 Jeep Liberty "test throttle position sensor" Questions

throttle position sensor/switch A circuit range/performance problem if running fine try reset--- if running rough black smoke star problems check the TPS wiring ,connections,and mounting if looks good

...Throttle position sensor. It is located on the side of the throttle body. follow the air breather box to the intake, you will see the throttle linkage the connector on the other side is the sensor. ...

throttle body and that leads to "crud" deposits that can obstruct the valve or keep the plunger off the seat and alter the air/fuel mixture. Passageways need to be cleaned and the plunger end as well.

...throttle position sensor circuit, code 700 is for a general fault with the transmission, and 734 happens when the engine RPM is out of range in 3rd or 4th gear. You might find the problem for all ...

...test to see if this solves the problem. Should it not, the next step is to replace the Throttle Position Sensor. This is a common problem with this model of jeep. The can of cleaner and the sensor ...

...test for faults Throttle position sensor A throttle position sensor (TPS) is a sensor used to monitor the throttle position of a car. The sensor is usually located on the butterfly spindle/shaft so ...

test. po341 is camshaft position sensor A bank 1 ckt range/perf and po122 istps/pedal position sensor A curcuit low input this is throttle position switch on side of throttle body! p0341 is a cmashaft

S ANOTHER LINK ON TESTING IT, Repair Guides Components Systems Throttle Position Sensor AutoZone com HERE'S A LINK TO THE PART. Throttle Position Sensor at AutoZone com Best Throttle Position Sensor..

...test of the Throttle/Pedal Position Sensor by testing the Throttle Position/Pedal Position output from its signal wire. Typically, I operate the Throttle or Pedal manually and watch the rise and fall ...

Throttle position sensing • Internal diagnostics • Cruise control functions • Manage TAC electrical power consumption The TAC system components include the following: • The accelerator pedal position