2002 Jeep Grand Cherokee "replace cylinder head" Questions

...CYLINDER HEAD GASKETS
A one piece steel cylinder head gasket is used for
all five cylinder heads.
Cylinder head gaskets are available in three thicknesses.
Identification holes or notches ...

replace the engine oil and filter and recheck for the conditions once more. There are three remaining causes for coolant in the motor oil, and they all require you to dismantle the engine. This can be

...cylinder head gasket or a cracked cylinder head. When either fail, combustion gasses will enter the cooling system and push the coolant out. As the level inside the cylinder heads drops the remaining ...

...replace it and inspect the corresponding hydraulic tappet for excessive wear. Inspect the push rods for straightness by rolling them on a flat surface or by shining a light between the push rod and ...

...replace a blown head gasket on my '94 jeep grand cherokee laredo 4x4? I think it is the gasket because there was this milky looking stuff on my oil stick, and there was little water specks out of the ...

a head gasket on a 2001 Grand Cherokee 4.01 Litre, 6 cylinder? If you have to ask this question maybe you should be thinking of not attempting this task and should consult a professional to do the job

...top part of engine) and the crank shaft is located in the cylinder block (the lower part of the engine) to replace either of these components are expensive to replace req the engine to be stripped ...

...CYLINDER HEAD GASKET SEALED CORRECTLY.THE HEAD COULD BE SLIGHTLY WARPED NEED SHAVED DOWN A LITTLE AT MACHINE SHOP. BUT.MOST OF THE TIME WHEN YOU REMOVE INTAKE MANIFOLD AND CYLINDER HEADS YOU WILL GET ...

2001 grand cherokee running hot , replaced water pump last year,radiator 2 months ago and just now changed fan relay,clutch fan and thermostat . Engine runs fine , no water in oil or out ...

1999 Jeep Grand Cherokee overheated 4 ltr/straight 6; engine overheated resulting in cylinders #3, #4 compression at 30 (other cylinders @150); certain that head gasket needs replacing, but also hear ...