2002 Jeep Grand Cherokee "pulling front wheel hub" Questions

Ad

...front cv shaft on a 1995 Jeep Grand Cherokee 4x4 5.2L I've got the Axle nut off and the three 13 mm bolts through the back and there is still no movement.I don't want to beat on the ...

Ad

Question about Jeep Grand Cherokee

1 Answer

will not go into four wheel drive after pulling lever to full time four wheel drive position and moving forward in drive position Does you model have manual front wheel hub locks?

Ad

Question about Jeep Grand Cherokee

1 Answer

...front wheels and stering wheel if does it while driving can be anything from tire balance -tire gon bad-bearing/hub-loose , damaged or worn out front suspension parts jack up truck keep wheel on move ...

Question about Jeep Grand Cherokee

1 Answer

...front wheel. Unbolt the caliper and move aside. Remove the rotor. Remove the axle nut. Unbolt the 3 hub/ bearing bolts and remove hub assembly. Pull the axle shaft out through the opening left by the ...

Question about Jeep Grand Cherokee

1 Answer

...on changing the front right cv joint axle shaft on my 1999 grand cherokee remove wheel and tire caliper and rotor axle nut hub bearing pull axle out of spindle slide new axle in and reverse ...

Question about Jeep Grand Cherokee

2 Answers

front wheels. Seems to be worst when turning right. Car is Overland AWD model with 90K miles but has done this since we bought it in 04 with 8K miles on it. Have taken it to the mechanic several times

Question about Jeep Grand Cherokee

2 Answers

...front axle remove the brake caliper then rotor. lare center axle nut. 3 twelve point 13mm bolts on the back side of the hub. wheel bearingh assembly should slide out. axle should come out by just ...

Question about Jeep Grand Cherokee

1 Answer

...wheel drive doesnt work. have any solutions? Also my defroster wont work my window gets foggy on the passengar side. Do you have manual lock in hubs??? Alot of these work off of vacuum. check you ...

...front left wheel, it is directly proportionate to how fast I'm driving. I pulled the tire and found no evidence of rubbing, could this be a bearing? could be a hub bearing, but you also should check ...

...pulling it off, it may need a some effort, if too tight, hit it a couple of times with a hammer, (not too hard) to loosen it up. The sensor is bolted to the backing plate in front of a toothed wheel ...

Not finding what you are looking for?
2002 Jeep Grand Cherokee Logo

3,525 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...