2002 Jeep Grand Cherokee "ho2s bank 2 sensor location" Questions

Ad

Question about Jeep Grand Cherokee

3 Answers

Ho2S 2 signal is less active than signal produced by front oxygen sensor. This code sets when HO2 Sensor voltage is greater than 999 mV for more than 2 minutes (time depends on model. Could be as high

Ad

Question about Jeep Grand Cherokee

2 Answers

Ho2S 2 signal is less active than signal produced by front oxygen sensor. This code sets when HO2 Sensor voltage is greater than 999 mV for more than 2 minutes (time depends on model. Could be as high

Ad

...ho2s and o2s both in bank 1 both causes ---wiring---short to positive- Replacing both sensors in bank 1 should fix the fault ---ensure that you use the correct tool for this as anything else will ...

...HO2S Heater Control Circuit High Bank 1 Sensor 2 https://www.carobdcodes.com > jeep-p0038-ho2s-heate... OBD-II Trouble Code Description for P0038 Jeep ... Jeep Grand Cherokee SRT8,2006 Jeep Commander ...

Question about Jeep Grand Cherokee

1 Answer

...Bank 1, Sensor 1).You will likely notice poor fuel economy the illumination of the Check Engine Light.A code P0141 may mean that one or more of the following has happened:open or short to ground in ...

Question about Cadillac Cars & Trucks

1 Answer

...HO2S Bank 1 Position 1) Located in RH front pipe of the exhaust catalytic converter -- Engine Controls Connector End Views in Engine Controls Heated Oxygen Sensor (HO2S Bank 1 Position 2) Located in ...

...HO2S) location (bank 1, sensor 2) (bank 2, sensor 2)-2.7L engine Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine I hope help you with this (rated this help). Good luck. Since 1996, ...

Question about Jeep Grand Cherokee

1 Answer

...bank 1. P0036 = HO2S Heater Control Circuit (Bank 1 Sensor 2) - No. 2 Heated Oxygen sensor on bank 1 For both of these to trigger on the same bank, means most likely an Open or Short to Ground ...

...HO2S) 2 bank 1 heated control --circuit low===causes --wiring short to positive --- HO2S--- ecm code p 0136 refers to HO2S 2 bank 1 circuit malfunction===causes --heating inoperative --wiring-- ...

...error code of P0038 P0038 HO2S Heater Control Circuit High (Bank 1 Sensor 2) It is located behind the catalytic converter, in the exhaust pipe . P0038 HO2S Heater Control Circuit High Bank 1 Sensor ...

Not finding what you are looking for?
2002 Jeep Grand Cherokee Logo

3,525 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...