...Cluster) messages over the Data Bus circuit for 20 seconds. Possible Causes: Data Bus circuit from MIC to the PCM is damaged or it is open Instrument Cluster is damaged or has failed PCM unable to ...
Question about Jeep Grand Cherokee
cluster bus message? anyone out there fmiliar with the fix for this please help. i have tested voltage to the bus wire yellow/violet at the harness for the cluster and it is active and reads between 0
Bus" message is actually caused by a loss of communication between computer modules due to a true failure, but in MOST cases, it is simply a glitch in the system that confuses the cluster and requires
...bus" read out on inst cluster . hooked scanner to obd 2 port and got a "no link" reading. also have a key symbol with a circle and slash thru it on inst cluster . what checks can i do to narrow down ...
...cluster from the PCM over the Programmable Communications Interface (PCI) data bus. Check this procedure for Retrieving codes. After, noted this codes, check what means here ...
bus is a data communications circuit used to send information to the dash gauge cluster from the engine and/or trans. computers. This information is typically vehicle speed, engine temp., oil pressure
Question about Jeep Grand Cherokee
...bus errors name them, all. by number. if the battery is good then the can-buss error are real. are head lights bright,? and still bright after cranking head lights work key off, they? key on,what ...
...bus connections at cluster, check the cluster fuses,check the CCD data bus bias, cehck the CCD data bus voltage, check the CCD data bus terminations. 920-cluster is not recieving a vehicle speed ...
Question about Jeep Grand Cherokee
...same with coolant temperature ! So I would have it taken to the dealer if you don't know about this stuff ! Need special tools to test this 2004 Chrysler Sebring No Bus message in cluster ...
...bus wire going to the instrument cluster or a failed instrument cluster itself. If you are having other related problems you're either going to have a failed module corrupting the communications bus, ...
3,525 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions