2002 Jeep Grand Cherokee "2001 front axle" Questions

...2001 chevy blazer When switching buttons for four wheel drive,transfer case engages and drive shaft from case to front differential spins, but front wheels do not engage. Checked actuator and cable. ...

front or rear>? why must i ask this.? ill toss coin, and go rear............ but my post , links the full chapter on how to do it called and FSM Factory service manual, covers this on all cars made

2001 Jeep Grand Cherokee. I have a Whining noise in my front end area, seems to go away when turning to the left. Also I have a strange clicking noise mainly under braking, but when you have the right

Humming noise from front axle - fades at higher speeds +50mph 2001 Jeep Grand Cherokee Limited Hi Checked the oil level ? John.

...when i turn in slow speed If this a 4WD then you most likely have a bad front axle "U" joint. My 2001 JGC did the same. I added a bottle of friction modifier in the diff and it solved the

...front axle replacement Too long to write it all out but you need to remove the axle nut first...remove the center cover from the wheel and the cotter pin if there is one. Put the wheel back on and ...

...front axle to 2wd and 4wd. Pop your front axle cover off and see if maybe the tuning fork looking actuator is stuck, this happens a lot in the winter months. 3. This can also be in the transfer case ...

...axle seal leaked, GL5 lube and soaked the brakes and all? or the front pinion? the job requires, all Gear lube, be cleaning off all parts there. after the job ends, or it will leak RESIDUAL GL5 ...

...2001 Jeep Grand Cherokee. Looks like it is attached to the front axle, I think transmission cylinder. It looks like it came loose. I can't figure out where it goes. It's not leaking or anything. So I ...

front axle,and when i engage the 4 wheel drive the noise gets worse Most likely wheel bearing or cv joint issue. look for a ripped open cv boot. I believe that year used cv joints instead of regular u