2001 Jeep Wrangler "hard shift" Questions

hard to shift into 2nd, and 4th. If you shoved it hard enough, you could get it to stick in gear. Then when I got home, I couldn't shift into reverse, either. When driving, it was very hard to

...one off how do you change a shift knob on a 2001 jeep wrangler it's a screw on type...at first it's hard to turn but after turning counter clockwise real hard you'll be able to loosen the shifter ...

...hard before it will shift up to second. Other shifting to other gear changes are fine. When was the last time the transmission fluid and filter changed? I would have that serviced first. If it is an ...

...hard to shift into first gear. Hydraulic clutch is full. No grinding of gears...when you try it will creep forward or backward without shifting completely into gear, After great effort it will shift ...

...Shift fork actuator is stuck or malfunctioning. well this car is PArt time 4wd so that means someone shifted to 4wd, right? or it wound not be on now, in most cases. if you shifted to 4wd in dry ...

...shift into reverse while running and shifts hard into other gears Assuming its a stickshift (you didn't say) it's likely your clutch isn't working properly...either low fluid level or clutch is

shift to vibrate like that it sounds like the noise is coming from under neath my feet but only when under a load???????? More than likely you need new u-joints, but from judging from the date on this

...shift at a stop sign and its stuck in 3rd gear. 1988 jeep wrangler. It has been grinding the gear for a few weeks now everytime I change from 2nd to 3rd gear it grinds really bad. It kinda feels like ...

...shift lever. Check under the dash on the brake pedal shaft for the switch and make sure it is not loose, disconnected, damaged or failed. Try to move the steering wheel hard while you start the

1990 yj jeep leaking oil from trans and shifting hard check fluid level. if low it will shift hard. also fix leak. could be a pan gasket or a cracked housing