2001 Jeep Wrangler "ball joints" Questions

replacing bottom ball joint I need to remove the old ball joint. What do I have to unbolt do that? it doesn't "unbolt" it is pressed in and out with a special ball joint press tool, about $150 to buy ...

...joint? HAVE YOU CHECKED THE BALL JOINTS ? jack it up and raise one of the wheels off the ground putting a bar under the tire raise and lower the bar to see if there is movemement in the ball

...speed up it is the u joint. grease will not help it once it is worn. if you have the one with the ball at the end near the transfer case instead of the two u joint drive shaft its the ball is

ball joints replaced. Is that normal wear for that age and amount of use? Yeah it can be cause of road conditions weather conditions and most oe balljoints don't have grease fittings. Its not uncommon

...ball joints are still tight, no slop there ! This is a 1991 Jeep Wrangler....... Thank you, Rich B I assume you are lifting the tire/wheel assembly and seeing play? The only two places you will see ...

popping sound when i hit a bump 97 jeep wrangler had been off road when it started sounds like a ball joint Could be 47 different things, ball joint included. Could be any suspension bushing, shock ...

1992 jeep wrangler ticks when you turn if it comes from the front it is most likely ball joints (cvu joints,aaxels same thing)

...causes of noise, moving is dangerous can be, bad wheel bearings. bad u-joints driving on ice free pavement, noise is normal. bad ball joints. and other suspension parts up front, get it

...front end aligned last week. if wobble before alignment- you have front end damage-upper or lower ball joint or cv joint- if after align ment_TAKE BACK TO ALIGNMENT SHOP- either way have looked at ...

...Sitting still you can hear a metallic clinking sound as you turn the wheels but it only hangs-up when you are driving. no problem until today! check your u joints and ball joints in the frunt ...