...ball joint I need to remove the old ball joint. What do I have to unbolt do that? it doesn't "unbolt" it is pressed in and out with a special ball joint press tool, about $150 to buy a decent
...ball joint? HAVE YOU CHECKED THE BALL JOINTS ? jack it up and raise one of the wheels off the ground putting a bar under the tire raise and lower the bar to see if there is movemement in the ball ...
you speed up it is the u joint. grease will not help it once it is worn. if you have the one with the ball at the end near the transfer case instead of the two u joint drive shaft its the ball is worn
...it can be cause of road conditions weather conditions and most oe balljoints don't have grease fittings. Its not uncommon. A ball joint is probably the most abused and overlooked part of a
see any wear related play is from the bearing or the ball joint, neither are adjustable. Movement of the entire assembly is controlled by the shocks and springs but play would not be evident in either
...ball joint Could be 47 different things, ball joint included. Could be any suspension bushing, shock bushing, a arm bushing, shock mount, wheel bearing Pittman arm bushing, lug nut, broken rim...beat ...
1992 jeep wrangler ticks when you turn if it comes from the front it is most likely ball joints (cvu joints,aaxels same thing)
...be, bad wheel bearings. bad u-joints driving on ice free pavement, noise is normal. bad ball joints. and other suspension parts up front, get it
...end aligned last week. if wobble before alignment- you have front end damage-upper or lower ball joint or cv joint- if after align ment_TAKE BACK TO ALIGNMENT SHOP- either way have looked at
...wheels but it only hangs-up when you are driving. no problem until today! check your u joints and ball joints in the frunt ...
281 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions