1 day. The fluid is full and clean, but the pump I put on was a reman. I think I should replace the pump again, but I was curious if there is something else going on. The fact that it quieted it makes
...quiet down noisy comopressors, and to thicken and lubricate. So, I tried it 2 days ago, and ran it 100 mi. like it said, and there WAS an improvement in the worn out Power Steering Pump. The cost was ...
Question about Jeep Grand Cherokee
...1. I believe that after the water pump and thermostat were installed, they did not completely fill the radiator, whether by oversight or purposely I don't know. If it was intentional, they knew you'd ...
1. spark plugs 2. distributor cap (needed?) 3. fuel filter (should be easy) 4. timing belt (if no chain) - but this would have to be taken in, too complicated Thanks! go here for all the help you need
clean and free from dirt and oil. The gasket itself must be free of cuts and deformations and must fit securely in the grooves of the covers. read my next comment for more help without forget. Method
...1/2 turn, on each side of the BPMV (Figure 2). 2.Attach the valve pressure bleeding tool J 39177 to the left and right high pressure accumulator bleed valve stems of the BPMV (Figure 3). Tighten tool ...
3,397 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions