2001 Jeep Grand Cherokee "oil remove sending unit" Questions

Ad

...Remove the pressure sender (2). Oil pressure sending unit To install: Install oil pressure sender. Connect oil pressure sender wire. Install front splash shield. Lower vehicle. Connect the negative ...

Ad

...oil pressure sending unit 94 grand cherokee limited v 8 The oil pressure sending unit is located in the block of your engine. You'll find it close to the oil filter is attached. It's ...

Ad

oil pressure sending unit's electrical connector, remove the sending unit, now most sending units are small and look like a short chubby spark plug with an electrical blade connector on the end of it.

...remove the oil pressure sender and hook a manual oil pressure gauge up to your engine and verify you have sufficient oil pressure, if you have good oil pressure on your gauge then replace the sending ...

Question about Jeep Grand Cherokee

1 Answer

remove the oil pressure sensing unit and install a mechanical pressure gauge to verify actual oil pressure. If that checks out good then I replace the sensor. Oil in the connector for the sending unit

Question about Jeep Grand Cherokee

1 Answer

...oil sending unit which is located right above the oil filter on those models which is a poor design. The part can be bought at a parts store for about $25 and will only take a few minutes to replace. ...

Question about Jeep Grand Cherokee

1 Answer

...oil pressure sending unit in this location...in that case, an oil pressure sending unit socket is what you need...many mechanics still use channel locks to remove/replace this unit...Hope this

Question about Jeep Grand Cherokee

2 Answers

oil gauge reads 80psi what is the problem Sounds like a faulty sending unit. Remove transducer (sending unit) and test pressure with external gauge. Hope this helps. Most cars do read high oil ...

Question about Jeep Grand Cherokee

1 Answer

you said you changed the oil sending unit, and tried a aftermarket which worked, so the other option is to have you oil gauge checked. The sending unit may be good but you gauge is not reading proper

remove the oil sending unit on a 2002 jeep laredo with a 6 cylinder engine Drain oil, remove oil pan and unbolt sending unit. You can go to autozone.com and register for full free online repair manual

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

3,397 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...