...3 ball stud alignment posts from their sockets (be cautious of the sharp edges of the grille and fender areas surrounding the headlamp). rp edges of the grille and fender areas surrounding the ...
...hole in the bracket assembly. It is made of a hard plastic material and the relay is bolted to the fender area underneath. If you are refering to the cooling fan relay, it is under the ...
...of where the bottom of the headlight sits.....and the relay is mounted to the inner fender ....a dremel tool works
...removal NOTE: It is not necessary to remove the hood to replace the hood hinges. Hood hinges can be replaced one at a time. 1. Using a grease pencil or equivalent, mark the position of the hood hinge ...
where do you find the radiator fan relay on 2002 jeep grand cherokee larado behind head light,, on passenger side, on fenders underside ,remove head light completely,, drill 2 inch hole into ...
cracked exhaust manifold Need to R&Rand put splash flaps in the fender wells. 2 bolts undo bottom flange, remove any heat shields over manifold, remove side bolts, dislodge and disgard the ...
...with my 01 Jeep GC 4L. about a month ago. My fix was the fan relay located on the passenger side fender well under the battery tray and headlight assy. had to remove both to get to the
...(if automatic unbolt converter) unhook exhaust,remove power steering pump altinater a leave on the fender wells, Buy yourself a Chiltons or a Clymer repair manual at one of the autopart stores near ...
...on driver side door dome light stays on broken ground wire in the rubber boot between the door and fender. I just fixed mine a week ago. Remove the door panel then unsnap the boot and move it over ...
...are known for going bad) which is located behined the passenger head light inside the passenger fender.It is a pain to get to.Some like to remove the head light assembly and cut a hole in the ...
3,397 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions