...and Motor is good, and there is voltage (unk strength) to the Motor; this only leaves the Blower Motor Resistor. Does the Fan work on High Only? Then it is definitely the Blower (Fan) Motor
fan motor for a 1998 grand cherokee 5.9litre You want a fan motor from a 93-95 taurus or sable. The fan connects to the motor differently so you will want to get a fan/motor assembly from a junk yard
Question about Jeep Grand Cherokee
fan motor does't turn on and jeep gets hot. is there a fuse 2 chg 2002 Jeep cherokee fan comes on when a certin temp is met.check the fan motor it self by straight wiring the fan motor with the engine
Question about Jeep Grand Cherokee
...fan motor and some say the relay switch help the radiator fan works off and on and when at a complete stop it runs hot The computer turns on the relay to power the fan motor. You would need to ...
...fan motor was the real problem, when it does this the motor is partially shorted, this overheats the new fan relay and will burn it out, I think most likely they should have caught this when the fan ...
fan motor ,fan relay which is located in the front bumper under the passenger head light assembly,or a wiring problem. first check fuses then check voltage to the fan motor if no voltage check voltage
...fan motor 2000 Jeep Grand Cherokee. The fan came loose from the fan motor and does not seem to be damaged and looks like it just needs threaded back on to the shaft of the motor. How do I remove the ...
fan motor on 2003 Jeep Grand Cherokee How do I replace the radiator fan motor on a 2003 Jeep Grand Cherokee? Or, should I replace the entire fan assembly? I hope that you haven't went out and bought a
...what could be the problem. Sounds like your radiator fan is not working. Have your replaced the fan or fan motor? Fan motor will cost $100 /diy Also, check for recall on this fan and motor through ...
...fan motor is good. What's next? Try the fan relay. Should be in the fuse box under the hood. The fan relay is located under the passenger side headlamp under the plastic fascia. cut a 2x2 hole in it ...
3,397 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions