2001 Jeep Grand Cherokee "contact switch" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...contact to be made to complete the circuit. You can remove the switch and check for burned or discolored areas on the body of the switch or where the contacts are made within the socket. If there is ...

Ad

...not lock front passenger door but operates other door locks; and pass window control inop Clean contacts on switch panels if this doesn't work check to see if when you hit switch that you are ...

Ad

Question about Jeep Grand Cherokee

2 Answers

...switch seems to fine with no loose connections. The hazard lights work without failure. Any suggestions? try a flasher Take switch out and spray contacts with contact cleaner its a jeep ...

...u need an independment mech who has xperienc for the other stuf Arnie on right track. Probably worn contacts in ignition switch but I would check out the light switch and the bulb armature to make ...

Question about Jeep Grand Cherokee

1 Answer

...or pressed on it a certain way the door switch that would not work would then work. I hope this helped you? Those door panel switch get corroded and do not make good contact, there for lose of

I only have high beems, I have replaced the bulbs and checked the fuses check light switch,contacts brun out due to heat,we alway use low beams, that y high beam still work,they dont get used as often

Question about Jeep Grand Cherokee

1 Answer

...the power motor is bad or has a loose wire stopping it from moving the seat upward. Try removing the switch and seeing if the contact points are corroded or if the switch is not making good

...switch (in your case, the computer) when activated, the second set of contacts close and allow high amperage or voltage flow to an item that requires that. (fan motor, starter etc) The contacts are ...

Question about Jeep Grand Cherokee

3 Answers

...switch, same problem. started probing around an found a bad contact on a connector. cleaned it and it works fine now. check all your lights for a short! 25amp circuit breaker in switch will make them ...

...or make a rubber boot to it or bend the switch plate forwards enough to allow it to be fully closed and make the necessary contact to it but the switch may very well need replacing this is your ...

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

3,397 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...