2001 Jeep Cherokee "cleaning burr" Questions

. front end ball joint replacement Your ball joints are press in units that require the use of a hand press. You can either rent one or some of the larger parts stores sometimes have ones you can ...

Driveshaft repair '89 Laredo I have a 1989 Jeep Cherokee Laredo 4.0L. My rear driveshaft dropped out of it (I have recovered it) and I determined that the U-Joint that connects to the transfercase ...

removing the water pump 2000 gmc jimmy drain coolant, remove drivebelt, remove upper fan shroud, remove cooling fan and clutch assemblyremove water pump drive pulley mounting bolts, remove upper hose ...

best bet if not, replace it with a new one and the good gasket with the screen. Try removing it and cleaning it real good

in my 1986 f250 changed the fuel filter between carb and fuel pump ran fine but noticed i was leaking fuel due to the fact i kinked the line. well I cut out the area that kinked with a hand saw and ...

fly wheel bolts keep coming lose this happens when the flywheel is out of balance. Check that the mount area is clean and free of burrs on the crank shaft. Ensure that the threads in the crank shaft ...

power sterring hose leaks. how is hose connected to pump pressure hose for power sterring is leaking. replaced hose but still leaks. 2001 jeep grand ltd. Most of the PS pressure hoses are Compression ...

1999 Toyota Camry V-6. No Start. Checked coil packs, enstalled new plugs. Checked timing, mass air flow, cam sensor and crank sensor, fuel injectors, ignitor. everything seems to work but will not ...

oil leak around oil filter I've change my oil filter three times on my newly aquired 96 Accord and is still dripping oil. I checked to see if the old gasket or burrs were on the housing, but is ...

Replaced calipers, rotors, lines and master cyliner just isn't working and lines are leaking. Have bled them twice. Any ideas? This is a '79 Monte Carlo with mini V-8. The leakey brake lines must be ...