2001 Jeep Cherokee "camshaft position sensor" Questions

Ad

...camshaft position sensor located on a 1996 jeep cherokee 4.0 the camshaft position sensor is inside the distributor, the crank sensor is at rear of engine in bell housing above starter. see pic of ...

Ad

...camshaft position sensor where this plate bolts onto the distrbutor housing with two screws...any suggestions would be greatly appreciated...Thank You camshaft position sensor is located in the ...

Ad

...Camshaft position sensor, the crankshaft position sensor, the throttle position sensor, and the pcm. to me it sounds like the crankshaft position sensor is out of range, move it a little closer and ...

...CAMSHAFT POSITION SENSOR B, bank 2 ckt range/perf. problem? I have already changed the camshaft sensor, but still have the problem. Please Help? ox. sensor no. 1 check exhaust pipe below exhast ...

...Camshaft Position Sensor (CMP) on the 4.0L 6 cylinder engine is bolted to the top of the oil pump drive shaft assembly. The sensor and drive shaft assembly is located on the right side of the engine ...

Question about Jeep Cherokee

1 Answer

... coil,crankshaft position sensor, camshaft position sensor. Try swapping out the ASD (automatic shutdown relay) , one of the most common faults on Dodge ,Chyrsler and Jeeps. Its located in the fuse ...

...camshaft position sensor located on my 99 Jeep grand Cherokee limited v8 4x4? If you still have a cap rotor and ignition wires, it's inside the distributor. If not, it is the part where the ...

...hot. I replaced the camshaft position sensor, crankshaft position sensor, distributor cap, rotor, plugs, wires, fuel pump and filter. Any ideas? Thanks. Sounds like the ignition coil is getting

...the bell housing. The Camshaft Position Sensor (CMP) is located inside the distributor. ....Reach behind the engine on the driver's side and down to the bell housing for the trany its on top of

Question about Jeep Cherokee

1 Answer

...changed the plug wires. You mentioned replacing the camshaft sensor. Have you checked the Crankshaft Position Sensor? Or the Mass Air Flow Sensor (may need cleaning)? Or the Throttle Position

Not finding what you are looking for?
2001 Jeep Cherokee Logo

926 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...