2000 Jeep Wrangler "trans axle loose" Questions

Ad

...trans fluid check Is it always in 4 wheel drive or can it be changed to 2 wheel drive 2 wheel high is rear wheel drive only. next one back is 4 wheel high. Only position i wouldn't worry about is 4 ...

Ad

...axle to the trans(rotating plate) wobbles. I have felt bad axles before, and the play is deffinetly out of tollerance, but it sees the whole assembly contributes to the slop, not the axle. any help ...

Ad

trans is on, lift the car, remove wheel, remove Axle, make sure to drain fluid before removing axle, may have to loosen strut assembly to remove axle. Once that's out of the way, proceed to remove the

Question about Jeep Wrangler

1 Answer

...trans axle. I have removed the axle. remove all the bolts to the trans axle. I tried to pry the driver side trans axle out with a screwdriver because I did not have a pry bar. The trans axle is loose ...

Question about Jeep Wrangler

1 Answer

...about the strut to allow axel spindle to come out of the bearing. Once axle is out of the bearing, place a drip pan under the trans and pull the axle out of the trans. Reverse procedure to

Question about Jeep Wrangler

1 Answer

trans as when you take the axle out fluid will follow.reverse the procedure and don't forget to top-off the trans fluid.even if none came out during axle install it is always a great idea to check

Question about Jeep Wrangler

1 Answer

how do you take off the trans axle cant get it to break loose from transmisson remove boot around axle and should be holding ring inside stopping axle from coming out  ....feel inside and see....

Question about Jeep Wrangler

2 Answers

...case, I believe. Some trans shops can get bushing kit. 94-Up K85901 part # thru TransTec there are two different axles for the vehichle you described ifu replaced axle u probably need other part # ...

Question about Jeep Wrangler

3 Answers

trans axle out of the hub assembly and swing the assembly out of the way, now get under the car with a big pry bar and put it against the trans axle and the transmission and just pry it out as hard as

Question about Jeep Wrangler

1 Answer

...si hatchback? take out the bolts that hold the struts ***. to the spindles. tie rod loose -brake caliper off pull out off way after taking nut off at the end of axle. pry bar pop axle out of

Not finding what you are looking for?
2000 Jeep Wrangler Logo

491 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...