2000 Jeep Wrangler "car ahead stopped left turn" Questions

ahead, stop.., turn wheel from dead center to the stop, and measure exactly how many turns. From dead center, it must be the same both ways. Steering boxes have an exact center setting, and get looser

...left and trying to park on the right side of street, the van stops and is hard for me to finish the turn and it wont complete. But when I turn right it works fine. Please help me and how much to fix? ...

...ahead and replaced pads on all four wheels. Calipers all looked good. No leaking or stuck calipers. After all pads replaced, brakes felt even a little better but problem still exists. Now ABS light ...

...left to right over and over to bleed power steering, with front wheels off ground slightly with front wheels pointing straight ahead.engine off. remove power steering filler cap.add power ...

car but it would die when he turned left. It still starts and could still run but Its sitting right now waiting to get fixed and the man is saying he has to get a whole new motor.....is he right or is

left & full right) while idling to remove air foam (bubbles) in the system. Should be good in a day or two. WARNING BEFORE DOING THIS PROCEDURE BECARE IF YOU HAVE LONG SLEEVES - JEWRELY- LONG HAIR

engine and fill to proper level.bleed by turning wheels side to side without hitting stops.refill as nessary without overfilling,let car run for 2 minutes with wheels straght ahead before test driving

...ahead the steering wheel with the ball joints disconnected should be tuned full left count turns on weel then full right set in the middle and adjust ball joint rod lengths and reconnect ...

...left or right position. Return the wheels to straight ahead position and operate the engine for 2-3 minutes, then stop the engine. Add fluid necessary. Road test the vehicle. Please don't forget to ...

...car is driven straight. This noise sounds like one of the constant velocity joints in the half shaft. The joint is probably dry or worn out and needs to be replaced. Sounds like a CVC shaft as the ...