2000 Jeep Grand Cherokee "truck shakes turning right left" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...shakes violently from one end of the slop to the other.Very dangerous!You need to get this fixed now! Get someone to turn the steering wheel while holding onto a front wheel and just watch for stuff ...

Ad

left or right,cranky noise , shaking ,strong vibration from the front wheels.BUT; when is cooling down -after 30 min. Please any suggestion ? 98' V8 5.2 ; Won't turn after highway run

Ad

Question about Jeep Grand Cherokee

1 Answer

...front end shakes real bad very good chance you will need tie rod ends, is there squeaking during turns? (ball joints) hit a bump at higher speeds and the car sways left and right? any other

...right wheel . no visible damanage ? The whole jeep shakes,but stops doing it when i straighten out and ther is no more noise. check the shock and suspention. That sounds like a shock absorber or a ...

Question about Jeep Grand Cherokee

2 Answers

...looks good grab tire on the fnt and turn left and right to locate loose parts I bet you broke your back hub assembly. It will make a noise like the tire is about to fall off. If so, it is. Be

Question about Jeep Grand Cherokee

2 Answers

...truck near the wheel and look for the steel bar that hooks up to the back of it. Have a friend turn the wheel back and forth, or grab the bar and give it a hard shake. If there is any play, the ...

Question about Jeep Grand Cherokee

6 Answers

turning on a 2000 jeep GC the key will not turn at all , the steering whell is not locked Worn tumbler. Firmly tap the end of the key with a hammer while you turn it. Don't smack your finger. Once the

Question about Jeep Grand Cherokee

1 Answer

...right or left, front end shinmies/shakes. Is this a trnsfer case problem..? Have a 2000 Grand Cherokee with Quadra-Trac I don't remember what the cut-off year was when Jeep changed from standard ...

Question about Jeep Grand Cherokee

3 Answers

...right or left the vibration isn't so strong when driving 55+. It is possible that the wheel bearings need to be replaced but would this cause a STRONG vibration? Tie rod ends do not have bushings ...

Question about Jeep Grand Cherokee

1 Answer

...right, the front bit of the car shakes violently... I assume its the driveshaft. If it is do, how do i know which one to buy? Left and right? is there a part number? could be a track control arm ,ask ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...