2000 Jeep Grand Cherokee "shift solenoid reverse" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...This could be an issue with the shift solenoid , but can also be caused by low fluid due to a leak, check your fluid. Is there a check engine light on, if there is it could be a solenoid

Ad

...shift solenoid. They are not too expensive and fairly easy to install. You will need to drop the pan and then you should be able to see the solenoids. But, before you do, put a scan tool on it and ...

Ad

Question about Jeep Grand Cherokee

1 Answer

will not shift into 2nd although it shifts into 1st and reverse. I just replaced the overdrive sylanoid and it did not solve the problem, any advice? Hi...I think you need to replace your 3-2 solenoid

Question about Jeep Grand Cherokee

1 Answer

...All other gears are fine at the moment, but the loss of reverse really puts a damper on normal driving. Any suggestions??? YOU NEED TO GET THE REVERSE SOLENOID CHECKED BUT 99% SURE YOU NEED ...

...solenoid and transducer, what else should i look at Check shift cable. Disconnect cable at tranny and move linkage by hand then reconnect cable and see if the cable moves the linkage the same

Question about Jeep Grand Cherokee

1 Answer

reverse. Would not engage any gear after all, got it towed home, wondering what happened, solution, costs. Michael. I just had to replace the gov solenoid and sensor in trans.Would do same thing ,feel

Question about Jeep Grand Cherokee

2 Answers

...shift lever. you have to take the plastic cover off and see the rachet for the shifter. I would check the fuse first The reverse lights switch is part of the so called TRS/solenoid block inside the ...

reverse. It dies immediately. this is an intermittent problem. I was told it was a solenoid in the trans controlled by the transmission ecm. I had a similar problem with my gc 4.0. It would stall when

Question about Jeep Grand Cherokee

1 Answer

reverse. Any ideas?? I would throw it on a scanner. Find out what's wrong. But with no scanner, the first thing I would do is check or replace the transmission range sensor/neutral safety switch. But,

...case the other end has a clamp on it but can't figure out where it goes my transmission is not shifting into 2nd gear. I do have 1st and reverse. Most new vehicles have some kind of electronic ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...