2000 Jeep Grand Cherokee "remove spark plug boot" Questions

Ad

...SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...remove the spark plugs from my 2002 jeep cherokee and replace them with new ones. It looks like you need to remove a bunch of things to get at them, but there must be an easier way. Use my advice at ...

Ad

Question about Jeep Grand Cherokee

3 Answers

...Remove the nut and lift the coil pack up. You may have to wiggle it around a bit and pull hard. The spark plug is located in the hole you just removed the coil pack from. The spark plug boot is ...

...remove old spark plugs from my Mom car. And put in new autolite spark plugs AP985, and set gaps to.035. And the car is running rough. Two possibilities to start with; A bad plug (it happens now and ...

Question about Jeep Grand Cherokee

2 Answers

...remove the 4 bolts holding the coil pack in place, lift the coil pack away from the engine block and the spark plugs are exposed. The boots that attach to the spark plugs are "fixed" in to the coil ...

Question about Jeep Grand Cherokee

1 Answer

...spark plug wire on his 1997 jeep having problems any tips? Spin the spark plug wire on the sprark plug, a few times left to right, and then firmly pull on the wire boot straight out from the plug and ...

...Remove your spark plugs and install the new ones. Put dielectric silicone in the boots and reinstall the coil pack. If it is a 4.7L, you have to remove the air box on the top of the engine. Each ...

Question about Jeep Grand Cherokee

2 Answers

...coil pack sit directly on the spark plugs. They are on the passenger side of the engine. Remove the coil pack held in by four 10 mm bolts. Pull the coil pack off and voila, there are the spark

...Remove the spark plug wires from the the plugs one at a time. Replace the plug, reinstall the plug wire, and then do the next one. This way you don't get the plug wires confused. When installing the ...

Question about Jeep Grand Cherokee

1 Answer

...spark plugs. First one must remove the cover from the air filter and to the carbuetor there are two bolts on each side of the cover over the engine then the driver side is easy to remove the boots on ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...