2000 Jeep Grand Cherokee "location 2 cylinder" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...2 cylinder side, 2/2 is the downstream of the number 2 cylinder side. Hope this helps. bank one is the bank that number one engine cylinder is located in, see link below for that info, also the ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...of the cylinder block. On the six cylinder engine, build date information can be found stamped on a machined pad located on the right side of the cylinder block between the No. 2 and 3

Ad

Question about Jeep Grand Cherokee

1 Answer

2 4.7L 8 Cylinder 1-8-4-3-6-5-7-2 5.7L 8 Cylinder 1-8-4-3-6-5-7-2 even the 5.9L fits. some jeeps had the engine changed. so not looking and seeing what you have its a wild card. mine has 3.8L V6 1-2-3

Question about Jeep Grand Cherokee

1 Answer

...location-1996 5.2L engine shown Fig. 2: View of the crankshaft position sensor and its location-1996 4.0L engine shown Removal & Installation 4.0L Engine The CKP sensor is located on the ...

...2 the other side, this assumes u have a V8, the sensor one location is the sensors that are BEFORE THE CATALYTIC CONVERTER, the sensors referred to as sensor 2 are after the ones AFTER THE CATALYTIC ...

...2 wheel dr 93 Jeep Cherokee Sport.Where is the slave cylinder in the transmission located? There are two versions...the easiest to work on is located on the drivers side of the bellhousing. The other ...

Question about Jeep Grand Cherokee

2 Answers

...location where is the temperature sensor switch on a 1996 grand Cherokee 8 cylinder 5.2 Usually right on the intake manifold Jacqui , there are 2 - one next to thermostat ,follow upper heater hose ...

Question about Jeep Grand Cherokee

1 Answer

...location, on the bell housing or top left corner of the BELL, (the bell is where the clutch is) 5.2L the (im reading page 8) "on the top of cylinder block ,near the rear right cylinder head" 2 bolts ...

...Cylinder Stalls each time it Starts? Help when it starts i will try to keep it going with accellerator with no prevail, Starts and stalls within 2 seconds? replace your idle air control valve their ...

Question about Jeep Grand Cherokee

1 Answer

...cylinder head (2). As the tonewheel rotates, the notches (1) pass through the sync signal generator. The pattern of the notches (viewed counter-clockwise from front of engine) is: 1 notch, 2 notches, ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...