2000 Jeep Grand Cherokee "installing blower motor resistor" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...blower motor resistor on 99 jeep grand cherokee Welcome to FIxYa.com Blower Motor Resistor and Controller Replacement Image Blower Motor Resistor Or Controller/Power Module Remove/Install REMOVAL 1. ...

Ad

...blower motor in. 99 grand Cherokee Check this procedure...Blower Motor Resistor and Controller Replacement REMOVAL 1. Disconnect and isolate the batten' negative cable. 2. Depress locking tab and ...

Ad

Question about Jeep Grand Cherokee

3 Answers

blower motor resistor, where is it located/ It will be up under the dash on the passenger side near the blower motor. It will have 5 or six wires in its connector Hello Tireman. The blower motor ...

Question about Jeep Grand Cherokee

1 Answer

...blower motor installed and tested the old one and it worked. installed a new blower motor resistor that didnt work. got a new temperature control unit put that in and that wasnt it. is there a ...

...blower motor operates on high speed only. there is a resistor located in heater box by the blower motor. sometimes glove box door needs to be lowered to access. if blower does not work on any speed ...

...blower motor.The blower motor may seem fine,but that is what causes these problems.If the fan switch and connector are fine,replace the blower motor,and blower resistor.The blower resister is located ...

...Blower Motor Resistor. They are known for having a bad connection and melting the connector. Check on Ebay, I bought a new harness kit on there. It was easy to install, just cut off the old connector ...

...installing a new rad to sludge in the system.. Also check fuses and relays, then check and/or replace the the blower motor resistor. It is an electrical component that is a part of the vehicle's ...

...blower motor resistor is used on vehicles equipped with the manual temperature control (MTC) heating- A/C system. Vehicles equipped with the automatic temperature control (ATC) heating-A/C system use ...

BLOWER MOTOR, I HAD TO BUY A NEW WIRING HARNESS. IT CAME WITH 3 BLUE THIN WIRES AND 3 THICK GREEN WIRES . IT IS ONLY A THRE WIRE PLUG . WHICH WIRES DO I USE AND IN WHAT ORDER DO THEY GO IN TO THE PLUG

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...